• Call Us 044-4850 1388 / +(91)-9840599878

  • E-mail srm_machinescenter@yahoo.com

Products

Home/Tapping Machine

Tapping Machine

Radial Drilling Machines in Chennai

Technical Specifications :

Tapping Machine Capacity in M.S. 7 mm.
Tapping Capacity in M.S. 6 mm.
Table 145x145 mm.
Spindle Travel / Table Travel(6mm) 75 mm.
Coloum Diameter 47 mm.
Spindle Center to coloumn 82 mm.
Distance Chuck to table 82 mm.
Tapping Depth 30 mm.
Overall height front width 26.1x20"x9.3/4
V-Belt A-38
Electrical Motor 0.50 H.P
Approx Machine Weight 50 Kg.
Radial Drilling Machines in Chennai

Technical Specifications :

Tapping Machine Capacity in M.S. 12 mm.
Tapping Capacity in S.S. 10 mm.
Distance Spindle to Column 140 mm.
Distance Between Chuck to base 450 mm.
Distance Between Chuck to Work Table 380 mm.
Size of base Plate-L X B 480 x 350 mm.
Size of Work Table-LX B 190 x 220 mm.
Diameter of coloumn 74 mm.
V-Belt (Inside) Inside A-71
V-Belt for Motor [Outside) A-30
No. of Spindle Range 3
Forward Speed Range 350/620/1100
Reverse Speed Range 420 / 745 / 1315
Motor Single Phase or Three Phase 0.75/1 H.P 1440 R.P.M.
Overall Height 1245 mm.
Overall Width 370 mm.
Overall Front to Back 600 mm.
Approx Machine Weight 120 Kg.
Radial Drilling Machines in Chennai

Technical Specifications :

Drilling Capacity in Steel 25 mm.
Tapping Capacity in Steel 19 mm.
Column Dia 90 mm.
Centre of Spindle to Coloum 255 mm.
Max Spindle to Table 650 mm.
Max Spindle to Table 1050 mm.
Taper in Spindle M.T.-3
Spindle Travel 185 mm.
Range of Speed 8
Table Size 345x345 mm. OD
Bare Size Machine Area 350x325 mm.
Overall base size 625x420 mm.
V-Belt Size B-52
Electric Motor 1440 RPM 1 HP
Approx Machine Weight 200kg.
  • Tapping 19 mm C.I. & Non Ferrous Metal Tapping Capacity will be 19 mm.
  • Standard Equipments : Motor pully, Fine feed attachment & panel board system.
Radial Drilling Machines in Chennai

Technical Specifications :

Drilling Capacity in Steel 19 mm.
Tapping Capacity in Steel 12 mm.
Column Dia 74 mm.
Centre of Spindle to Coloum 200 mm.
Max Spindle to Table 650 mm.
Max Spindle to Table 900 mm.
Taper in Spindle M.T.-2
Spindle Travel 125 mm.
Range of Speed 8
Table Size 250x250 mm. OD
Bare Size Machine Area 480x310 mm.
V-Belt Size A-43
Electric Motor 1440 RPM 0.5 HP
Approx Machine Weight 110kg.(Approx)
  • Tapping 12 mm C.I. & Non Ferrous Metal Tapping Capacity will be 19 mm.
  • Standard Equipments : Motor pully, Fine feed attachment & panel board system.